This is an aqueous liquid containing a urea solution. It is a clear, odorless, and chemically pure urea solution, typically composed of 32.5% high-purity urea and 67.5% deionized water. It is used to detoxify toxic gases emitted from the exhaust of diesel vehicles. By being sprayed into the exhaust system, it facilitates a chemical reaction that converts nitrogen oxides (NOx)—not carbon monoxide (CO) or hydrocarbons (CH)—into harmless substances: nitrogen gas and water vapor.

Initially, AdBlue was used exclusively in heavyduty vehicles such as trucks, lorries, andcommercial vehicles. Today, however, AdBlue is required in nearly all new diesel vehicles, including passenger cars, that are equipped with a Selective Catalytic Reduction (SCR) system to meet modern emission standards AdBlue is a critical fluid for your vehicle's operation. All vehicles have a low AdBlue indicator. It is essential to refill the tank when thiswarning appears because if the AdBlue level runs completely out, the vehicle's engine is programmed not to restart (or to operate in a reduced-power "limp" mode) until it is refilled. Therefore, it's crucial to top up your AdBlue before the tank is empty.

Refilling AdBlue is quite easy. On most cars, the filler neck for the AdBlue tank is located right next to the diesel fuel cap, often marked with a blue cap or the letters DEF (Diesel Exhaust Fluid). To top up, simply follow these steps:
1. Switch off the vehicle's ignition completely before you begin filling.
2. Pour the AdBlue liquid directly into the tank through the dedicated cap.Storage and Temperature If the tank is full and you have leftover liquid in the bottle, there is no harm in storing the AdBlue. You can add the remainder later as the tank level drops.
The ideal storage temperature for AdBlue is generally between −6∘C and 30∘C. AdBlue is known to freeze at −11∘C. However, this will not damage the fluid; once the weather warms up, the liquid will thaw and return to its normal state, ready for use.

Our company conducts all ISO 22241-1-2-3-4 tests using our own dedicated chemists and laboratory personnel. To ensure consistent product quality, we continuously cross-reference our internal test results with accredited external laboratories.Every product shipped to our customers is accompanied by a detailed Quality Report. Furthermore, our packaged products are marked with LOT numbering and QR codes for full traceability to the end user.In the event of a product complaint, reference samples taken during the filling process are carefully retained for a period of 18 months

  • Determination of Insoluble Matter Content
  • Determination of Trace Element Content
  • Determination of pH and Conductivity
  • Determination of Moisture
  • Determination of Aldehyde Content
  • Determination of Biuret Content
  • Density Measurement

 

PRODUCT AND TRADEMARK CERTIFICATIONS

VDA AdBlue® License

The certification was based on a quality audit conducted by VDA QMC (Quality Management Center in the Verband der
Automobilindustrie e. V.) based on ISO 22241

GET A QUOTE